Beretta APX Carry ★ Recommended
Slide Cut: Micro Cut
Direct fit - Micro/K footprint
Direct fit - Micro/K footprint
SWAT Optics Verified
Updated:
4,900+ Tested Combinations
110+ Optics
262+ Handguns
What Handguns Fit the Riton X3 Tactix PRD?
11 compatible handguns verified • 11 direct fit • 0 with adapter plate
📋 Quick Answer
The Riton X3 Tactix PRD fits 11 handguns. 11 pistols accept direct mounting with the RMSc footprint—no adapter needed, including the Beretta APX Carry, Canik MC9, Glock 17 Gen6. 0 additional handguns are compatible using adapter plates that convert other slide cuts to the RMSc pattern. This compatibility data is SWAT Optics Verified.
Does the Riton X3 Tactix PRD fit my handgun?
The Riton X3 Tactix PRD uses the RMSc footprint mounting pattern. If your handgun has a RMSc-cut slide, the Riton X3 Tactix PRD mounts directly without adapters. SWAT Optics has verified 11 handguns with direct RMSc compatibility. For handguns with different slide cuts (like Glock MOS, Sig RX, or Springfield OSP), you'll need an adapter plate—0 handguns work this way. Check the lists below to find your specific handgun model.
No Image
Riton X3 Tactix PRD
Footprint: RMSc
Emitter: open
MSRP: $249.99
Compatible: 11 handguns
11
Total Compatible
11
Direct Fit
0
With Adapter
11
Recommended
Which Handguns Accept the Riton X3 Tactix PRD Directly?
11These 11 handguns have RMSc-cut slides that accept the Riton X3 Tactix PRD without any adapter plate. The optic mounts directly to the slide using the included hardware. Direct mounting provides the lowest possible sight height and most secure fit.
Canik MC9 ★ Recommended
Slide Cut: Micro Cut
Direct fit - Micro/K footprint
Direct fit - Micro/K footprint
Glock 17 Gen6 ★ Recommended
Slide Cut: Gen6 ORS
Gen6 ORS - direct mount with included plate
Gen6 ORS - direct mount with included plate
Glock 19 Gen6 ★ Recommended
Slide Cut: Gen6 ORS
Gen6 ORS - direct mount with included plate
Gen6 ORS - direct mount with included plate
Glock 43X MOS ★ Recommended
Slide Cut: Slimline MOS
Direct fit - Slimline MOS RMSc cut
Direct fit - Slimline MOS RMSc cut
Glock 45 Gen6 ★ Recommended
Slide Cut: Gen6 ORS
Gen6 ORS - direct mount with included plate
Gen6 ORS - direct mount with included plate
Glock 48 MOS ★ Recommended
Slide Cut: Slimline MOS
Direct fit - Slimline MOS RMSc cut
Direct fit - Slimline MOS RMSc cut
Glock 49 Gen6 ★ Recommended
Slide Cut: Gen6 ORS
Gen6 ORS - direct mount with included plate
Gen6 ORS - direct mount with included plate
Springfield Echelon ★ Recommended
Slide Cut: Springfield VOM
VIS self-locking interface - No plate required - Confidence: 5/5
VIS self-locking interface - No plate required - Confidence: 5/5
Springfield Echelon 4" ★ Recommended
Slide Cut: Springfield VOM
VIS self-locking interface - No plate required - Confidence: 5/5
VIS self-locking interface - No plate required - Confidence: 5/5
Springfield Echelon 4.5" ★ Recommended
Slide Cut: Springfield VOM
VIS self-locking interface - No plate required - Confidence: 5/5
VIS self-locking interface - No plate required - Confidence: 5/5
Which Handguns Need an Adapter Plate for the Riton X3 Tactix PRD?
0These 0 handguns require an adapter plate to mount the Riton X3 Tactix PRD. The adapter converts the handgun's native slide cut to the RMSc footprint pattern. Adapter plates are available from various manufacturers and typically cost $20-50.
No adapter-compatible handguns found for this optic.
Frequently Asked Questions About Riton X3 Tactix PRD Compatibility
What handguns fit the Riton X3 Tactix PRD?
The Riton X3 Tactix PRD fits 11 handguns total. 11 pistols accept direct mounting without adapters, while 0 additional handguns are compatible using adapter plates. Popular direct-fit options include Beretta APX Carry, Canik MC9, Glock 17 Gen6, Glock 19 Gen6, Glock 43X MOS, Glock 45 Gen6, Glock 48 MOS, Glock 49 Gen6....
Does the Riton X3 Tactix PRD require an adapter plate?
It depends on your handgun's slide cut. If your pistol has a RMSc-cut slide, the Riton X3 Tactix PRD mounts directly—no adapter needed. Handguns with other slide cuts (like Glock MOS, Sig RX, or Springfield OSP) require an adapter plate to convert to the RMSc pattern.
What mounting footprint does the Riton X3 Tactix PRD use?
The Riton X3 Tactix PRD uses the RMSc mounting footprint. This is a standardized hole pattern that determines which slides the optic can mount to directly. Other popular footprints include Trijicon RMR, Shield RMSc, and Aimpoint ACRO.
What fits the Riton X3 Tactix PRD?
The Riton X3 Tactix PRD fits 11 handguns total. 11 accept it with direct fit (no adapter needed), and 0 require an adapter plate. Popular options include Beretta APX Carry, Canik MC9, Glock 17 Gen6, Glock 19 Gen6, Glock 43X MOS.
What footprint is the Riton X3 Tactix PRD?
The Riton X3 Tactix PRD uses the RMSc footprint mounting pattern.
Which handguns can mount the Riton X3 Tactix PRD without an adapter?
11 handguns accept the Riton X3 Tactix PRD with direct fit: Beretta APX Carry, Canik MC9, Glock 17 Gen6, Glock 19 Gen6, Glock 43X MOS, and 6 more.
Is the Riton X3 Tactix PRD good for concealed carry?
The Riton X3 Tactix PRD has an open emitter. It works for concealed carry, though enclosed emitters may be preferred for pocket carry.
How is this compatibility data verified?
SWAT Optics verifies all compatibility through physical testing. Our database contains 262+ handguns, 110+ optics, and 4,900+ verified records.
Need Help Finding the Right Optic?
Search our complete compatibility database: 110+ pistol optics and 262+ handguns with 4,900+ verified combinations.
Use the Compatibility Finder